Charge Controller
What is a solar charge controller?
A solar charge controller is a solar-powered voltage and current regulator. They are used in off-grid and hybrid off-grid applications to regulate power input from PV arrays to deliver optimal power output to run electrical loads and charge batteries.
​
Do I need to shut off my solar controllers if I am plugged in to shore power?
The MPPT controllers offered all work in conjunction with any and all other charging sources. These controllers will only put out as much POWER as the battery bank needs, therefore, if there are multiple charging devices each will regulate itself based on battery voltage to prevent over-charging your batteries.
​
Why do you use multiple, smaller controllers instead of a single larger controller?
There are a couple of reasons we set our solar installs up with multiple smaller controllers in lieu of a single larger controller.
-
Breaking up a large array into multiple circuits ensures that we can run smaller, cheaper, lighter wire from the panels down to the charge controller without hooking the panels up in series.
-
Panels hooked up in series tend to be very inefficient in our experience, as a bit of shade cast on one of the panels will eliminate or drastically reduce the output of all panels on that circuit. For this reason, we hook up all of our panels in parallel.
-
We can actually install two 50 AMP MPPT solar controllers for less than a single 100 AMP solar controller, so not only does it have more efficient output, but it is more efficient on your wallet!
Generator
I have a generator, will I still be able to use it with your system?
​
Units that have an onboard generator have a transfer switch that “chooses” if the coach will run on shore power or generator power. This is all done behind the scenes without any interaction from the user. Whether we are setting your entire coach up to be off grid, or simply a few inverted circuits, your generator will work with your system just as seamlessly as before your upfit!
Inverter
Does my invertor need to be turned on if not in use?
The inverter can be used in two ways. Either off and turned on as needed or left on and will activate as it senses demand.
What does an inverter do?
There are two types of inverters. Stand alone inverters, and inverter chargers. A stand alone inverter converts DC power from the batteries to AC power for the outlets or other AC powered appliances. An inverter charger does the same but also converts outside AC power (shore power or from a generator) to DC power to charge the battery bank.
Install/System Quote
How do you estimate how much solar we will need?
​
The easiest way for us to get the most accurate estimate for what type of system you need is for you to fill out our upfit questionnaire where you will outline information about your rig, what you'd like to use your new solar system for, where you plan to travel, and other key details that will allow our experienced team of engineers to create the perfect solution based off of your specific needs.
Miscellaneous
Why do I see voltage, but no amps?
This is expected if the batteries are full and there are no large loads demanding power. As long as your controller shows appropriate voltage from the solar panel, and your battery voltage is not dropping, your system is working properly.
​
If you see appropriate voltage from the solar panel, and the solar controller reads a higher voltage than your battery monitor (or actual battery voltage) this indicates a broken connection between the controller and the battery bank. This could be a blow fuse, or a loose connection at the controller or the battery. Be sure to check both Power and Ground connections, along with the fuses.
​
My vehicle has a smart alternator what do I do?
A DC-DC charger is available for your vehicle based on your needs. Please contact your dealer or Future Solutions for recommendations for your vehicle.
Solar
What is solar?
The term "Solar power" or "Solar energy" is referring to the process of using photovoltaic cells to convert energy from the sun into electric power. This requires a minimum of a solar panel, solar controller, and of course cables and fusing.
​
What size panels do you install?
We offer xyz 123
​
Does solar work at night?
No, Solar does not produce electricity at night. - it doesn't necessarily produce electricity at all?
​
Do I need to do anything to my Camper before plugging in with Solar?
Solar charging is completely independent and relies on reading the battery voltage to know when and how much of a charge to put out. This means it will work WITH any other charging source that is present, so there is no need to make any adjustments or changes to your solar controller or settings when you plug in to shore power.
​
Why is my solar fuse large 250 amps?
The solar fuse is rated to protect the wire at what the wire/conductor is rated at.
​
What do I do if it is raining cloudy or no sun?
In this situation, it is best to use an outside power source (shore power or generator) to charge the batteries when they are low. Practicing energy management and conservation will help stretch out the battery charge as well.
​
Can I expand my solar capability?
All solar systems are upgradeable (providing you have open roof space). We recommend using a solar calculator to determine how much energy you need.
​
How do I know how much solar power I need?
The general rule of thumb is that a 100-Watt solar panel can produce about 30 Amp-hours per day, so you can use this guideline to determine approximately how many panels you need. Another suggestion is to match your battery capacity in Amp-hours with your solar output in watts.
​
How much does solar cost?
This depends primarily on your individual power needs. Do you want to keep your battery charged while your RV is in storage? Do you want to boondock with air-conditioning? Or, maybe something in between? There are a lot of variables that effect cost, if you need help determining what is best for you, fill out our inquiry form.
​
How do I add solar to my RV?
Visit Future Solutions, your dealership or another custom solar power up-fitter.
​
What is needed for Solar?
This depends largely on what you are trying to accomplish. If the goal is to just maintain a charge on the batteries during storage, you will need a solar panel, charge controller, and of course a battery. If the goal is to run AC powered items without a generator or shore power, you will need a larger solar array, a larger solar controller, a larger battery bank, and an inverter.
COMPONENTS
Cerbo (Victron)
How to link Cerbo to my phone?
Follow the pictures and steps on pages 20 – 27 of the User Manual.
​
Link to documentation from Victron website:
https://www.victronenergy.com/upload/documents/Cerbo_GX/GX_Device_Manual-en.pdf
​
What do the items on my Touch 50 screen mean?
​
1. Top left box is Line 1 of incoming AC power (Grid)- this can be from a generator or shore power.
2. Top middle of screen is inverter. Shows state (Invert, bulk, absorb, float, off).
3. Top right of screen shows AC loads- when running off-grid, this shows how much power is being used. When on shore or generator, this shows only the power coming through the inverter (Line 1).
4. Bottom left of screen is battery monitor- this shows how much power (watts) is being put into or pulled out of the battery bank. It also shows the battery bank voltage and the amount of current. If the current is a negative number, that is energy being pulled from the battery bank. If it is a positive number (or no sign) it is energy being put into the battery bank.
5. Bottom middle of the screen shows DC loads. This is a calculation of how much power your lights, water pump, ceiling vent fans or any other DC loads are drawing.
6. Bottom right of screen shows overall solar input. This is all of your solar controllers combined. To se each controller individually, see “View Component Details”.
SmartShunt (Victron)
What is a battery shunt?
A shunt is a precision resistor that is used to monitor current flow to or from a battery bank.
​
What does it do?
The SmartShunt is a battery monitor. It measures battery voltage and current. Based on these measurements, the battery state of charge and time to go is calculated. It also keeps track of historical data, such as deepest discharge, average discharge and number of charge/discharge cycles.
​
How is it different from BMV-712?
The Smart Shunt uses the same base components as the BMV-712, the main difference is that the SmartShunt does not need a physical remote display.
​
How do I view information?
There are two ways to view information from the SmartShunt. It has built-in Bluetooth broadcasting,
so you can link a smart phone or tablet to it through the Victron Connect app. If a Victron GX device (such as the Cerbo used on the 1200i-L or 600i-L systems) is being used, the SmartShunt can be hooked directly to the GX device via a VE.Direct cable. Even when hooked up to a GX device, the SmartShunt can still be viewed in the Victron Connect app via Bluetooth connection to a smart phone or tablet.
​
What does the information mean?
State of Charge- Battery state of charge in (%) percentage is displayed first.
Output- Output shows: Voltage, Current, Power, Consumed, AH, and Time Remaining
Input- This is a feature that can be used on motorized units.
Solar Panels
How much wattage should I see from my bifacial solar panels?
Depending on battery SOC (State of Charge), you should expect to read the true listed wattage
of power from a 200 watt panel and 270 watts of power from a 300 watt panel. This is due to panels being mounted flat, and power loss between cable runs and power conversion. There are a lot of variables that can effect the wattage you see. Different times of year, different physical locations, and instantaneous power demands (loads or battery SOC) are a few of these. A full battery bank with minimal loads turned on will not allow power to flow from the panels. In that case, you will see panel voltage but no or little amperage. **Use a fuller, in-depth explanation on how bifacial panels will read true to their listed wattage**
​
How do I clean them?
It is best to clean the panels with only a wet rag, then wipe them dry with a soft cloth.
​
Do I need to maintain my panels?
Yes, it is necessary to keep your panels clean to absorb as much sunlight as available. It is important to follow all OEM guidelines with regards to the roof seal as well.
​
Which is better, monofacial or bifacial solar panels?
Check out our blog post here for an in-depth look at the key differences between the monofacial and bifacial solar panels and see how you can improve your RV life!
